TR EN ES
Polyester Gloss Varnish

Polyester Gloss Varnish

It is a varnish with maximum transparency and glossy that can be applied horizontally and vertically to any types of wooden surfaces. Due to polyester structure, it creates a rigid and excellent glossy surface. It has the ability to obtain a wet-looking gloss and to maintain this brightness for a long time. It can be applied to the surfaces on which Eskim polyester filler varnish has been applied. It provides the desired color can be obtained by mixing with polyester or universal pigment pastes.

Product Features

  • Product Name
  • Product Description
  • Chemical Structure
  • TDS
  • SDS
  • Density, 20°C gr/cm3
  • Viscosity, 25°C, KU
  • Solid (by weight) ,%
  • Gloss, gloss 60º
  • Set-to-Touch Time, min.
  • Gel Time, min.
  • Dry-Through time,hour
  • Product Highlights
  • Areas of usage
  • Mixing Ratio
  • Recommended Use
  • Storage Conditions
  • Package Type
  • explanation
  • PLV00.6011
  • Polyester High-Gloss Varnish
  • Polyester
  • 0,95± 0,03
  • 55± 5
  • 60± 3
  • 95± 3
  • 120± 5
  • 25± 3
  • 24± 5
  • *High filling skill and spreading after application *Forming hard an strength floor
    *Any desired color can be obtained by mixing suitable pigment pastes
  • It is used for varnishing surfaces such as wood, metal etc. A very bright, smooth and hard surface is obtained. A full film is formed.
  • PLV00.6011 : 100
    AcceleratorvPC-100 : 2,5
    Hardener PH-100 : 2,5 Polyester/Cellulosic Thinner : max.20
  • The surface must be clean and dry, free of dirt and dust. Accelerator must be added into the Polyester Varnish and mixed thoroughly.The amount of the mixture to be used at one time should be taken and the hardener should be added into it, mixed well again and applied immediately by spraying with a gun. If thinner is required, Cellulosic/Polyester Thinner can be used at a maximum rate of 10%. The application should be made in 2 layers, 125 + 125 gr/m2. Gelling time should be waited between coats. After 4-5 hours in the summer months, and after 12 hours in the winter months, it should be made ready for the topcoat application with sandpaper.During the application, the ambient temperature should not be below 5 °C.
  • It should be stored in closed packages, in a dry clean, cool environment that will not be exposed to direct sunlight. In its original packaging, the stock period is 1 year.
  • 12 kg
  • *The values are valid at 23°C ambient temperature and 50% ± 10% relative humidity conditions.