TR EN ES
TR EN ES
HOMEPAGE / PRODUCTS / Industrial Group / Epoxy Paints
Epoxy Paints

Epoxy Paints

It is a reaction drying epoxy resin based epoxy paint with good adhesion properties that is cured with a polyamide hardener.

It is used as an anticorrosive primer for painting all kinds of wood, metal and mineral surfaces exposed to water, sea water, chemicals and abrasion, and in areas where high corrosion resistance is required.

Product Features

Geri
İleri
  • Product Name
  • Product Description
  • Chemical Structure
  • TDS
  • SDS
  • Density, 20°C gr/cm3
  • Viscosity, 25°C, DIN4 sec.
  • Solid (by weight) ,%
  • Gloss, gloss 60º
  • Set-to-Touch Time, hour
  • Dry-Through time, day
  • Pot Life, sa
  • Product Highlights
  • Areas of usage
  • Mixing Ratio
  • Recommended Use
  • Storage Conditions
  • Package Type
  • explanation
  • EPB.900.XX
  • Epoxy Paint
  • Epoxy
  • 1,60± 0,03
  • 90± 10
  • 78± 3
  • 50± 10
  • 3± 1
  • 7± 1
  • 5±1
  • *High corrosion resistance *Excellent adhesion to surfaces such as sheet metal, casting, galvanized * Resistant to sea water, chemicals, mineral oils
  • It is used as an anticorrosive primer for priming all kinds of wood, metal and mineral surfaces exposed to water, sea water, chemicals and abrasion, and in areas where high corrosion resistance is required. It adheres perfectly on sheet metal, galvanized and aluminum surfaces.Its performance is very good in general industry, machine manufacturers, metal protection and marine applications.
  • EPB.900.XX : 100
    SE.300 : 20
    Epoxy/cellulosıc thinner : 15-20
  • The surfaces to be applied must be cleaned of all kinds of substances.Metal surfaces should be sanded and after mixing in the specified proportions, it should be waited for 10-15 minutes before application for pre-reaction. The surface temperature must be at least 10 °C. No application should be made around the dew point of the water (between 2-5 °C).Suction or chamber type gun (Air pressure: 3-4 bar, nozzle diameter 2,5 mm), roller and brush can be used.In roller applications, bubble formation should be followed and if any light combing should be done with a soft long bristle brush. The product should be applied to 10-12 kg/m2.
  • It should be stored in closed packages, in a dry clean, cool environment that will not be exposed to direct sunlight. In its original packaging, the stock period is 1 year.
  • 15 kg
  • *The values are valid at 23°C ambient temperature and 50% ± 10% relative humidity conditions.