TR EN ES
TR EN ES
HOMEPAGE / PRODUCTS / Furniture Group / Polyester Product Group / Lacquer Type Polyester
Lacquer Type Polyester

Lacquer Type Polyester

Lacquer Type Polyester is applied to surfaces parallel to the ground, it cannot be applied vertically. It is not affected by the top coat varnishes applied on it and creates a very solid floor. It is used to obtain a smooth subfloor by filling wooden surfaces (such as veneer, massive). It is a kind of filling varnish.

Product Features

Geri
İleri
  • Product Name
  • Product Description
  • Chemical Structure
  • TDS
  • SDS
  • Density, 20°C gr/cm3
  • Viscosity, 25°C, Cp
  • Solid (by weight) ,%
  • Gel Time, min.
  • Sanding Time, hour
  • Product Highlights
  • Areas of usage
  • Mixing Ratio
  • Recommended Use
  • Storage Conditions
  • Package Type
  • explanation
  • PLC.6005
  • Lacquer Type Polyester
  • Polyester
  • 1,06± 0,03
  • 60± 10
  • 48± 3
  • 10± 1
  • 12± 2
  • *High filling skill and spreading after application *Forming hard an strength floor *Fast drying
  • Furniture and decoration works on all kinds of wooden surfaces (chipboard, MDF, wood veneer and
    It is used to provide the smooth surface required for the top coat varnish application (on solid surfaces).
  • PLC.6005 : 100
    PC-100 : 2
    PH-100 : 2 Polyester/Cellulosic Thinner : max.10
  • The surface must be clean and dry, free of dirt and dust. Accelerator must be added into the Polyester and mixed thoroughly.The amount of the mixture to be used at one time should be taken and the hardener should be added into it, mixed well again and applied immediately by spraying with a gun. If thinner is required, Cellulosic/Polyester Thinner can be used at a maximum rate of 10%. The application should be made in 2 layers, 120 + 180 gr/m2. Gelling time should be waited between coats. After 4-5 hours in the summer months, and after 12 hours in the winter months, it should be made ready for the topcoat application with sandpaper.During the application, the ambient temperature should not be below 5 °C.
  • It should be stored in closed packages, in a dry clean, cool environment that will not be exposed to direct sunlight. In its original packaging, the stock period is six months.
  • 15 kg
  • *The values are valid at 23°C ambient temperature and 50% ± 10% relative humidity conditions.